Da Vinci 3D Printer 1.0 Junior NFC Resetter

XYZ Da Vinci NFC Tag Resetter Re-Writer for Da Vinci 1.0 Junior. Reset your Da Vinci 3d junior printer NFC chip with this filament chip resetter and save hundreds of pounds on XYZ 3d printer filament.

You can downgrade the firmware of your 3d printer, follow the instructions on page “da Vinci Firmware Downgrade”.

The Resetter is easy to use,

Up to firmware 2.4.6 no later.

1. Download the NTAG Software
2. Run the NTAG213.exe as Administrator
3. Plugin the Resetter with a USB cable to your PC
4. Click the connect button on the top left
5. Place the NEW NTAG on the Resetter
6. Click the button “Get Card Details”
7. UID Number will appear in the empty block
8. Now click “Set Card Details” TAB
9. Choose preferences and click “Set Data”
10. Turn off printer
11. Insert TAG
12. Turn on printer

Software Download Here:

Easy to use and reset your Da Vinci 3d junior printer NFC chip with this filament chip resetter and save hundreds of pounds on XYZ 3d printer filament. If you are looking for a great quality PLA filament the why not try the amazon basics PLA. Amazon basics PLAis a good quality filament, smooth and perfectly rolled spool, good adhesion and perfect finish.

PLA (Polylactic acid), a commonly used thermoplastic material known for its lower melting temperature and ease of use (no heated bed required), plus it’s low-warp, odourless, and offers a glossy-type finish. With the spool’s built-in gauge it shows the percentage of material remaining and approximate length remaining, perfectly engineered to reduce jamming. It’s a good idea to keep filament dry and away from UV light. Polylactic acid or polylactide (PLA) is a thermoplastic polyester with backbone formula (C₃H₄O₂)_n or [–C(CH₃)HC(=O)O–]_n, formally obtained by condensation of lactic acid C(CH₃)(OH)HCOOH with loss of water (hence its name)

Looking for the Da Vinci cartridge resetter then look here!

Want to join our cool Facebook group? then see you here